225/30R20 tire size
25.31 inches tall, 8.86 inches wide, on a 20 inch rim. Sidewall 2.66 in (67.5 mm) per side, 797 revolutions per mile.
This is geometry, not fitment approval. It says what a size measures, never whether it fits a vehicle.
- Overall diameter
- 25.31 in
- Sidewall
- 67.5 mm
- Revs / mile
- 797
225/30R20 in numbers
225/30R20 works out at 25.31 inches (643 mm) tall and 225 mm (8.86 in) wide, with 67.5 mm of sidewall on each side of a 20 inch rim. One turn covers 2020 mm (79.5 in), so it turns about 495 times per kilometre and 797 times per mile, or 825 times a minute at 100 km/h. Of the 555 passenger sizes listed here, 457 are taller and 97 are shorter. At 30 series this is a low-profile size: none of the other 123 sizes on a 20 inch rim here has a shorter sidewall than its 67.5 mm, the shortest sidewall of all 879 sizes in the catalog. 85 other passenger sizes come within 3 percent of its diameter; the closest is 215/55R16 (-0.02 percent).
What each part of 225/30R20 means
- 225
- Section width in millimetres, sidewall to sidewall at the widest point. Not the tread width, which is narrower.
- 30
- Aspect ratio. The sidewall is 30 percent of the section width: 225 x 30 / 100 = 67.5 mm. A lower number is a shorter sidewall on the same width.
- R
- Radial construction. The R here is construction, not the speed symbol R. The speed symbol sits after the size, in the service description.
- 20
- Rim diameter in inches. The bead seat diameter of the wheel this tire mounts on.
- no prefix
- Euro-metric (no prefix). An unprefixed size is Euro-metric, not P-metric with the P left off. The prefix decides which standards body's load table rates the tire. What the prefixes mean
Dimensions 225/30R20 implies
| Dimension | Imperial | Metric | Where it comes from |
|---|---|---|---|
| Section width | 8.86 in | 225 mm | Printed on the tire in millimetres. Nominal: a real tire measures wider on a wide rim and narrower on a narrow one. |
| Sidewall height (one side) | 2.66 in | 67.5 mm | Computed. Bead seat to tread, one side only. |
| Overall diameter | 25.31 in | 643 mm | Computed from rim plus two sidewalls. |
| Rim diameter | 20 in | 508 mm | Printed on the tire. The bead seat diameter of the wheel it mounts on. |
| Circumference | 79.53 in | 2020 mm | Computed as pi times the nominal overall diameter. |
| Revolutions | 796.7 per mile | 495 per km | Computed from the nominal circumference. A loaded tire turns slightly more often. |
These are the nominal dimensions the size code implies. A real tire's measured dimensions depend on its mould, its construction and the rim width it is mounted on, so a manufacturer's specification sheet for a specific tire is the authority for that tire.
The overall diameter formula used here reproduces all 52 radial passenger design diameters published in an Indian vehicle standard to within 1.4 mm, 0.5 mm on average: AIS-044 (Part 2) Amendment 2, Annexure A.
Sizes within 3 percent of 225/30R20, any rim
The 10 sizes in this catalog closest to 225/30R20 in overall diameter, of the same type, ranked by how little they change it. The speedometer columns assume the instrument read correctly on 225/30R20 and that nothing was recalibrated.
| Size | Rim | Overall diameter | Difference | True speed at an indicated 100 km/h | True speed at an indicated 60 mph |
|---|---|---|---|---|---|
| 215/55R16 | 16 in | 25.31 in (643 mm) | -0.02% | 100 km/h (0.0) | 60 mph (0.0) |
| 155/60R18 | 18 in | 25.32 in (643 mm) | +0.03% | 100 km/h (0.0) | 60 mph (0.0) |
| 235/45R17 | 17 in | 25.33 in (643 mm) | +0.05% | 100 km/h (0.0) | 60 mph (0.0) |
| 265/35R18 | 18 in | 25.3 in (643 mm) | -0.05% | 100 km/h (0.0) | 60 mph (0.0) |
| 205/70R14 | 14 in | 25.3 in (643 mm) | -0.06% | 99.9 km/h (-0.1) | 60 mph (0.0) |
| 265/40R17 | 17 in | 25.35 in (644 mm) | +0.12% | 100.1 km/h (+0.1) | 60.1 mph (+0.1) |
| 265/30R19 | 19 in | 25.26 in (642 mm) | -0.22% | 99.8 km/h (-0.2) | 59.9 mph (-0.1) |
| 165/80R15 | 15 in | 25.39 in (645 mm) | +0.31% | 100.3 km/h (+0.3) | 60.2 mph (+0.2) |
| 235/40R18 | 18 in | 25.4 in (645 mm) | +0.34% | 100.3 km/h (+0.3) | 60.2 mph (+0.2) |
| 195/60R16 | 16 in | 25.21 in (640 mm) | -0.40% | 99.6 km/h (-0.4) | 59.8 mph (-0.2) |
A positive difference means the replacement is taller, so the vehicle travels further per revolution and the speedometer reads LOW. Many vehicles leave the factory reading slightly high on purpose, so treat this as a change from whatever the instrument did before, not as an absolute claim about it.
Minus one: 19 inch rim, same rolling diameter
A smaller wheel with a taller sidewall. Common for winter fitments, where sidewall is wanted and wheel diameter is not.
| Size | Overall diameter | Difference | True speed at an indicated 100 km/h | True speed at an indicated 60 mph |
|---|---|---|---|---|
| 265/30R19 | 25.26 in (642 mm) | -0.22% | 99.8 km/h (-0.2) | 59.9 mph (-0.1) |
| 225/35R19 | 25.2 in (640 mm) | -0.45% | 99.5 km/h (-0.5) | 59.7 mph (-0.3) |
| 235/35R19 | 25.48 in (647 mm) | +0.64% | 100.6 km/h (+0.6) | 60.4 mph (+0.4) |
| 275/30R19 | 25.5 in (648 mm) | +0.72% | 100.7 km/h (+0.7) | 60.4 mph (+0.4) |
| 255/30R19 | 25.02 in (636 mm) | -1.15% | 98.8 km/h (-1.2) | 59.3 mph (-0.7) |
A positive difference means the replacement is taller, so the vehicle travels further per revolution and the speedometer reads LOW. Many vehicles leave the factory reading slightly high on purpose, so treat this as a change from whatever the instrument did before, not as an absolute claim about it.
Same 225 mm width, different aspect ratio
What changing only the aspect ratio does, holding the width and the rim.
Questions this size raises
- What does 225/30R20 mean?
- 225 is the section width in millimetres. 30 is the aspect ratio: the sidewall is 30 percent of the section width, which works out at 67.5 mm. Radial construction. 20 is the rim diameter in inches. The service type is Euro-metric (no prefix).
- How tall is a 225/30R20 tire?
- 25.31 inches (643 mm) in nominal overall diameter. That is the diameter the size code implies; a specific tire's measured diameter depends on its mould and the rim width it is mounted on, and the manufacturer's specification sheet is the authority for that tire.
- What is the sidewall height of a 225/30R20?
- 2.66 inches (67.5 mm) per side.
- How many revolutions per mile does a 225/30R20 turn?
- 797 revolutions per mile, from the nominal circumference of 79.5 inches. A loaded tire deflects and turns slightly more often than that, so a manufacturer's published revolutions figure usually runs a few percent higher.
- What is the minus one size for 225/30R20?
- 265/30R19 keeps the overall diameter closest on a rim one inch smaller, of the sizes in this catalog. Minus sizing is common for winter fitments, where a taller sidewall and a narrower tread are wanted.
The rest of the sidewall
The size is one line of a sidewall. What follows it decides whether the tire is legal on the vehicle at all.
- Load index table - the number after the size, and the mass it stands for. Must meet or exceed the vehicle placard.
- Speed symbol table - the letter after the load index, including the ZR, W, Y and (Y) cases.
- DOT date code - how old the tire is, and why a three digit code is not the same as a four digit one.
- Every other marking - UTQG grades, load range letters, M+S against the three peak mountain snowflake.
- Compare 225/30R20 against another size - diameter, clearance and speedometer error side by side.
Where these figures come from
Computed on this page, not looked up. Each figure and the arithmetic behind it:
- Sidewall height (one side)
section width x aspect ratio / 100 = 225 x 30 / 100 = 67.5 mm - Overall diameter
rim diameter + 2 x sidewall = (20 x 25.4) + 2 x 67.5 = 508 + 135 = 643 mm = 25.315 in - Circumference
pi x overall diameter = pi x 643 = 2020 mm = 79.53 in - Revolutions per mile
63360 inches per mile / circumference in inches = 63360 / 79.53 = 796.7 - Revolutions per kilometre
1000000 mm per km / circumference in mm = 1000000 / 2020 = 495
Published values here were read from 2 independent sources:
- Published tire size sitemap - SimpleTire, sitemap dated 13 August 2026 (read 2026-08-27)Which sizes a national retailer publishes a catalog page for
- Published tire size listing sitemap - Discount Tire, sitemap read 27 August 2026 (read 2026-08-27)Which sizes a second national retailer publishes a catalog page for
These are independent publishers, not independent measurements. Each one reproduces a table originally set by a standards body, so agreement between them shows a value was transcribed correctly, not that the underlying table is right. Where a figure is safety relevant, check it against the tire manufacturer's own data before relying on it.
Before you fit anything
SidewallRef calculates the dimensions a size code implies and reproduces the published load index and speed symbol tables. It does not know your vehicle.
Load index and speed rating must meet or exceed what the vehicle placard specifies. The placard is in the driver's door jamb on most vehicles and is the authority for your vehicle, not this site.
Clearance at full lock and full suspension travel, wheel width and offset, brake and suspension component clearance, axle load capacity, inflation pressure and any legal requirement where you drive are the owner's and the fitter's responsibility.
Nothing here approves a fitment. Confirm any change with a qualified tire fitter and with the vehicle manufacturer's own specification before driving on it.